SWPF is site wide power failure.
Sunday, September 25, 2011
Thursday, September 22, 2011
Cooling water tube velocity in coolers
The usual recommended range is 0.3 to 2.4 m/s. A velocity of 1.5 m/s is good. Maximum is 3m/s
Wednesday, September 21, 2011
Is it better to put new tires on the front or back?
The new tires should be on the rear of the vehicle.
Read more here.
Tuesday, September 20, 2011
What is FLA for a motor
Full Load amps
FLA is the nameplate amperage rating of the motor when it is running at its designed horsepower and on the motors designed voltage. 746 watts = 1 HP. The FLA of a 1 HP motor at 240 volts would be W = amps x volts, Amps = Watts/Voltage. 746/240 = 3.1 amps full load. Overload the motor and the amps go higher, motor running at no load amps are lower than FLA
FLA is the nameplate amperage rating of the motor when it is running at its designed horsepower and on the motors designed voltage. 746 watts = 1 HP. The FLA of a 1 HP motor at 240 volts would be W = amps x volts, Amps = Watts/Voltage. 746/240 = 3.1 amps full load. Overload the motor and the amps go higher, motor running at no load amps are lower than FLA
Subscribe to:
Posts (Atom)