Tuesday, June 27, 2017

How to make adobe acrobat open a specific page using command prompt?


Use the following command

Acrobat /A "page=5" "xxx.pdf"


where xxx.pdf is the name of the pdf document.

The above command works in Acrobat 7 and up

Sunday, June 18, 2017

Did you brick your LG G4 H812 smartphone? Here are some tips that could salvage your device

This was successful in my Koodo LG G4 H812

Follow the instructions at https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 (section: TO GO BACK TO LP FROM MM )

Open LGUP on your computer, select "Upgrade", click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Make cup of tea and be patient 

There is no need to enter download mode! LGUP will do it for you.

The software will take care of all the things automatically and reboot to Android.

Root Telus Rogers Koodo LG G4 H812 by downgrading from Marshmallow to LollyPop


There is  no root available for LG G4 H812 Marshmallow (MM) devices now, but root is available for LollyPop (LP). The strategy here is to downgrade to LP from MM and root the device. You need to disable the OTA updates, since the root will be lost if you upgrade.

  1. Download stock KDZ from https://forum.xda-developers.com/g4/general/canadian-guide-complete-source-lg-g4-t3212449
    1. I downloaded "H81210n_00_1204STOCKkdz". All carriers are cross compatible (Bell, Rogers, Telus, Wind)
    2. If you have downloaded 10n kdz, you should download 10n rooted image. I downloaded "H81210nROOTEDrogers.rar"
  2. Downgrade from Marshmallow to LP https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
    1. TO GO BACK TO LP FROM MM - Open LGUP on your computer, select "Upgrade", click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Make cup of tea and be patient 

      If you are worried about losing your data after a full wipe, why not use the LG Bridge software to backup and restore.... it works fine!
      YOU WILL LOSE ROOT!
      There is no need to enter download mode! LGUP will do it for you.
  3. Install ROOT https://www.reddit.com/r/lgg4/comments/3ir4zn/guide_how_to_root_all_versions/
    1. Use dd if=/data/media/0/rootedsystem.img bs=8192 seek=65536 count=548352 of=/dev/block/mmcblk0 for H812 (all Canadian carriers LG G4)
  4. Install Xposed using https://forum.xda-developers.com/g4/themes-apps/guide-installing-xposed-locked-t3181593
    1. Follow instructions below worked for me
    2. Download FlashFire version 0.24, and xposed-v87-sdk22-arm64.zip
    3. Set your date of phone back to June 2015 .
    4. v0.24 has only one option (Auto-mount), which I left unchecked.
    5. 20 minutes of blank screen, then some flashfire text and a reboot, it optimized apps, and then finished normally.
    6. Install the xposed installer apk (XposedInstaller_3.0_alpha4.apk) and it reports v87 is active 

Saturday, February 20, 2016

Universal Naked ADB Driver

  1. Download from http://forum.xda-developers.com/google-nexus-5/development/adb-fb-apx-driver-universal-naked-t2513339 
  2. go to developer mode by clicking the build number 7 times (System--> About-->Build number)
  3. Plug in device
  4. In device manager point to this folder for adb driver
  5. Drivers will be successfully installed

Thursday, February 4, 2016

Lenovo Thinkpad T410 audio through displayport

Getting audio to pass through to TV when using displayport to HDMI cable

DisplayPort is actually capable of tranmitting audio and video. However some manufacturers or OEMs do not implement the audio pass through, luckily Lenovo has implemented this correctly in their Thinkpad T410.

Follow the step to get your laptop audio to TV.

  1. Start playing the video.
  2. When video is playing, go to Control Panel -->Sounds-->Playback tab
  3. You'll see a list of audio playback devices and TV (or amplifier if you are using one) should be one of the options. 
  4. Just choose TV and set it as the default audio device 
  5. The audio will be passed automatically to the TV from now on.

Move from Windows to Linux


  1. Install Linux Mint 17.3 Rosa with Cinnamon desktop (other good desktops are KDE MATE and XFCE)
  2. Install Libre Office instead of MS office
  3. Use Evolution instead of outlook
  4. Install Crossover linux or WINE:  is a Microsoft Windows compatibility layer available Linux.
  5. Install Oracle's virtualbox for running Windows virtual box